Preface

Chapter 1: Product Summary

1.1 Checking the Accessories

1.2 Nomenclature

1.3 Assembling

1.4 Connecting to the ComputerNomenclature

Chapter 2: Preparing to Cut

2.1 Preparation of Cutter Plunger

2.2 Attaching a Tool

2.3 Loading Media (Paper or Marking Film)

2.4 Aligning the Push Rollers

2.5 About the Default Screen

2.6 Connecting to the Power

2.7 How to Use Control Panel

2.8 Setting Feeding Method

2.9 Pre Feed of Media (Paper or Marking Film)

2.10 Selecting Tool Condition

2.11 Running Cutting Tests

2.12 Displaying Cutting Area

Chapter 3: Basic Operations

3.1 Raise or Lower the Tool

3.2 Move the Tool Carriage

3.3 Setting the Origin Point

3.4 Setting the Cutting Direction

3.5 Stop Cutting

Chapter 4: Convenient Functions

4.1 Settings for Cutting

4.2 Copy (Duplicate Cutting)

4.3 Panel Cutting

Chapter 5: ARMS (Advanced Registration Mark Sensing System)

5.1 Outline of ARMS

5.2 Setting and Adjustment of ARMS

Chapter 6: Manual Position Adjust

6.1 Outline of Manual Position Adjust

6.2 Manual Position Adjust

Chapter 7: Settings Regarding Cutting Quality

7.1 Cutting the Corner of Thick Media Sharp

7.2 Setting the Step Pass

7.3 Setting the Offset Angle

7.4 Setting the Distance Adjust

7.5 Setting Cut Line Pattern

7.6 Setting Initial Blade Control Position Adjust

7.7 Setting the blade control force

7.8 Setting Adjustment Between the Tools

Chapter 8: Settings Regarding Cutting Time

8.1 Setting Feed Speed for Pre Feed

8.2 Perform Automatic Pre Feed When Cut Data is Received

8.3 Sorting the Cutting Data

8.4 Setting the Moving Speed

8.5 Setting the Shortcut Move

8.6 Setting the Tool Up Height

Chapter 9: Settings Regarding Interface

9.1 Setting Interface

9.2 Connecting via wireless LAN

9.3 Connecting via wired LAN

9.4 Clearing buffer memory

Chapter 10: Settings Regarding Operation Environment

10.1 Related to Menu Display

10.2 Related to sensor

10.3 Plotter Environment-related Settings

Chapter 11: Settings of Controls from Computer

11.1 Settings Related to Command Processing

11.2 Related to GP-GL command

11.3 Related to HP-GL command

Chapter 12: Data Link

12.1 Select Connection Destination

12.2 Data Link with USB Memory

12.3 Output with a Bar Code

12.4 Communication Timeout

12.5 Skew Scanning

Chapter 13:

Cutting with supplied application software

Chapter 14: Maintenance

14.1 Daily Maintenance

14.2 Replacing Cutter Blade

14.3 Cleaning the Cutter Plunger

14.4 Setting the Alarm for Blade Wear Alarm

Chapter 15: Troubleshooting

15.1 Troubleshooting

15.2 Check plotter information

15.3 Printing the Setting of the Plotter

15.4 Creating Test Pattern

15.5 Creating CUTTING PRO

15.6 Confirm the Plotting Data

15.7 Self Diagnostic Test

15.8 Reading the error message

Appendix

A.1 Main Specifications

A.2 Options and Supplies

A.3 External Dimensions

A.4 Menu Tree

A.5 Initial Setting